[AsiaNet] Polyplastics' New DURACON (R) POM Grade Combines Durability and
Sliding Performance
AsiaNet 78629
(TOKYO, May 9, 2019 AsiaNet=연합뉴스) Polyplastics Co., Ltd., a leading global supplier of engineering plastics, announced the launch of a new polyoxymethylene (POM) grade, DURACON (R) POM WW-09, which combines high strength with good creep and sliding properties. Polyplastics, a leading developer of cutting-edge material technologies like WW-09, also announced plans to exhibit at the upcoming Chinaplas 2019 show (Hall 11.2 Booth B31) set for May 21-24 in Guangzhou, China.
Images:
https://kyodonewsprwire.jp/prwfile/release/M100475/201905076022/_prw_PI1lg_03WTLmtY.jpg
Polyplastics' DURACON (R) POM WW-09 delivers better mechanical properties by using high-molecular weight polymers and employing the company's original molecular design and polymerization technologies to achieve high initial strength and creep properties. The new material fills the need for sliding grades that require durability in high-load and high-weight conditions which employ thin walling to achieve lighter weight and better space efficiency.
DURACON WW-09 has highly rated mechanical properties compared to existing sliding grades, and maintains physical properties close to those of high-viscosity standard grade DURACON M25-44. Since the WW-09 grade uses high-viscosity type polymers, it exhibits better creep properties than other sliding grades. Along with the aforementioned short-term properties, the material also has long-term durability. So it can be used in product designs close to those of standard grades in applications where loads are continuously applied over the long term.
DURACON WW-09 offers the same good sliding properties as other sliding grades, but is also designed with the capability to provide noise reduction during sliding. The material is designed for balance with mechanical properties in mind, anticipating a maximum of 5 MPa of surface pressure which can typically occur in practical conditions, and with noise resistance at even higher surface pressures.
For more information, visit:
https://www.polyplastics.com/en/product/lines/pom_ww09/index.html
DURACON (R) is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
About Polyplastics
The Polyplastics Group is a global leader in the development and production of engineering plastics. The Group's product portfolio includes POM, polybutylene terephthalate (PBT), polyphenylene sulfide (PPS), liquid crystal polymer (LCP), and cyclic olefin copolymer (COC). With more than 50 years of experience, the company is backed by a strong global network of R&D, production, and sales resources.
SOURCE: Polyplastics Co., Ltd.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
Sliding Performance
AsiaNet 78629
(TOKYO, May 9, 2019 AsiaNet=연합뉴스) Polyplastics Co., Ltd., a leading global supplier of engineering plastics, announced the launch of a new polyoxymethylene (POM) grade, DURACON (R) POM WW-09, which combines high strength with good creep and sliding properties. Polyplastics, a leading developer of cutting-edge material technologies like WW-09, also announced plans to exhibit at the upcoming Chinaplas 2019 show (Hall 11.2 Booth B31) set for May 21-24 in Guangzhou, China.
Images:
https://kyodonewsprwire.jp/prwfile/release/M100475/201905076022/_prw_PI1lg_03WTLmtY.jpg
Polyplastics' DURACON (R) POM WW-09 delivers better mechanical properties by using high-molecular weight polymers and employing the company's original molecular design and polymerization technologies to achieve high initial strength and creep properties. The new material fills the need for sliding grades that require durability in high-load and high-weight conditions which employ thin walling to achieve lighter weight and better space efficiency.
DURACON WW-09 has highly rated mechanical properties compared to existing sliding grades, and maintains physical properties close to those of high-viscosity standard grade DURACON M25-44. Since the WW-09 grade uses high-viscosity type polymers, it exhibits better creep properties than other sliding grades. Along with the aforementioned short-term properties, the material also has long-term durability. So it can be used in product designs close to those of standard grades in applications where loads are continuously applied over the long term.
DURACON WW-09 offers the same good sliding properties as other sliding grades, but is also designed with the capability to provide noise reduction during sliding. The material is designed for balance with mechanical properties in mind, anticipating a maximum of 5 MPa of surface pressure which can typically occur in practical conditions, and with noise resistance at even higher surface pressures.
For more information, visit:
https://www.polyplastics.com/en/product/lines/pom_ww09/index.html
DURACON (R) is a registered trademark of Polyplastics Co., Ltd. in Japan and other countries.
About Polyplastics
The Polyplastics Group is a global leader in the development and production of engineering plastics. The Group's product portfolio includes POM, polybutylene terephthalate (PBT), polyphenylene sulfide (PPS), liquid crystal polymer (LCP), and cyclic olefin copolymer (COC). With more than 50 years of experience, the company is backed by a strong global network of R&D, production, and sales resources.
SOURCE: Polyplastics Co., Ltd.
[편집자 주] 본고는 자료 제공사에서 제공한 것으로, 연합뉴스는 내용에 대해 어떠한 편집도 하지 않았음을 밝혀 드립니다.
(끝)
<저작권자(c) 연합뉴스, 무단 전재-재배포 금지>
관련뉴스
